HOME >> NEWS >>Industry News >> Pay attention to the correct way of cleaning the tires

Pay attention to the correct way of cleaning the tires

If you wash your car and make the whole car look clean as new, cleaning the tires and wheels is one of the most helpful and respectable big bucks. At the same time, the maintenance of the tyres is also a very important key. However, because these places are often the whole layer of dirt, many people will use a very hard brush once, the result is usually not worth the candle. So how do you clean this part correctly and quickly?

Before washing the tires, prepare a long handle brush so that it can be washed thoroughly. When washing the front wheels, it's easier to clean all the places if you can turn the steering wheel around. If the tires are not too dirty, you can not spend money to buy a special detergent, with the general use of detergent to wash the line. Unless there's really too much dirt, it's probably going to cost a little.

In addition, washing tires can not only use brushes to wash, the brush is of course to use, but can not be used in chrome-plated mirror treatment of the wheel, this will leave very obvious scars. The general principle is to wash the large part with a sponge, wash a small place with a brush. For example: Both sides of the tyre can be brushed with a brush. As for some less obvious places, such as the fuel tank under the side, exhaust pipe, etc., because it is not obvious easy to be ignored, cleaning can be used with a brush brush force.

The sponge can be washed and cleaned without using the brush. In the car's appearance, as long as this part (tyre and knee below) clean, even if the other parts have some small stains, in fact, the whole car looks still bright fiber. On the contrary, it is not good. So do not think that this part is not important, in fact, this part is the focus of the whole car cleaning.

It is best to note that the tools for cleaning tires, wheels and rims are best not shared with other parts of the washing tool. Because this part is very dirty, it is likely that there will be some dust or small sand in the tool. If you wash other parts of the body, may cause damage to the body. If you have to use tools together, you should at least do the proper processing before you do it, or the body will scrape the candle.

Technical Support | Admin Login